Publicidad
Idiomas disponibles
Idiomas disponibles
When cutting a branch that is under stress, pay attention to the risk of elastic return. When the tension
•
of the wood fibres is released, the spring-loaded limb may strike the operator and / or project the chain
saw out of control.
Exercise extreme caution when cutting brush and young shrubs. Fine materials can grip the cutting chain
•
and be thrown as a whip in your direction, or you lose balance under the effect of traction.
Follow the instructions for lubrication, tension and chain change accessories. A chain whose tension and
•
lubrication are incorrect can either break or increase the risk of rebound.
Keep handles dry, clean and free of oil and grease. Oily, greasy grips are slippery and cause loss of
•
control.
Cut only wood, as well as for pruning and cutting wood. Do not use the chain saw for any other purpose.
•
For example: do not use it to cut plastic, masonry or construction materials other than wood. Using the
chain saw for operations other than those specified may result in hazardous situations.
Be careful when using the machine during stormy weather. Do not use the machine during lightning,
•
thunderstorms or in bad weather in general.
There is advantage of using a spiked bumper when cutting thick branches.
•
The tool must be used with an extension cable; please contact our service or ask your retailer for advice
•
about the type and length of extension cable that can be used with this chainsaw.
During maintenance and storage
Stop the tool and wait until it stops. Make sure all moving parts have come to a standstill.
•
Allow the machine to cool before performing inspection, adjustments, maintenance, servicing and
•
storage.
Store the tool where fuel vapour will not reach a flame or spark.
•
When transporting and storing, always place the tool in its transport guard and protective device on it.
•
Residual risks
Even if you use this product in compliance with all safety requirements, the potential risks of injury and
damage remain. The following hazards may arise from the structure and design of this product:
There are harmful health consequences resulting from the emission of vibrations if the product is used
•
for long periods of time or not properly managed and properly maintained.
There is risk of injury and property damage due to attachments or the sudden impact of hidden objects
•
when using the blade.
Risk of injury to persons and property caused by flying objects.
•
Prolonged use of this product exposes the operator to vibration and can produce so-called "white finger"
•
disease. To reduce the risk, wear gloves and keep your hands warm.
If any of the symptoms of "white finger syndrome" occur, seek immediate medical attention. Symptoms
•
of the "white finger*
changes or skin condition. These symptoms usually appear on the fingers, hands or wrists. Risk
increases at low temperatures.
1
include numbness, loss of sensitivity, tingling, pain, loss of strength, colour
Publicidad
