Publicidad
Idiomas disponibles
Idiomas disponibles
Sprocket
c.
Check the sprocket on signs of wear. If wearing is important, replace it with a new one. Do
not install a chain on a worn or damaged sprocket. Do not install a worn chain on a pinion.
d. Chain Saw
Check each time the cutter and cutting angles are as show below.
e. Sharpening of the chain
For best performance, we strongly recommend that you periodically sharpen the chain. The
chain can either be sharpened by a professional or by yourself by providing you with a
sharpening guide (make sure you know how to use it).
The chain must be sharpened when:
Wood chips have become powder
-
To perform a normal cut, force on the tool#
-
The cut is not straight Vibration increase
-
Fuel consumption has increased Sharpening method:
-
The chain saw must be switched off and locked before sharpening. Use a round file or
sharpening device (see in store).
Place the file on the tooth and push straight. Shift with the same movement.
After sharpening all teeth, check if the teeth are sharp.
Publicidad
