Publicidad
Idiomas disponibles
Idiomas disponibles
The unit should always be filled with oil for blade lubrication. Check the level before the use
and refill when necessary.
1. Filling with lubrication oil
The tool always must be filled with lubrication oil (for the blade). Check the level oil the tank.
When the oil arrives at the minimum level, the tank shall be completely filled.
To add lubrication oil, open the tank by removing the cap. Put directly the oil in the tank.
Close the tank with its cap.
Open and close
1.
Starting and stopping
Note: Ensure the brake is working efficiently. Check its operation every time before
commencing work with it.
Connect the tool to a mains power supply.
•
Depress the safety lock off button (2) whist squeezing the main switch (8).
•
Release the main switch to stop the tool
•
Publicidad
