HP DeskJet 4200e All-in-One Serie Guía De Referencia página 5

Printer hardware setup information
Follow instructions in the HP software for easy setup. Visit 123.hp.com to install software.
Load paper
1. Pull up to reveal the paper tray.
Slide open the guide.
2. Load Letter or A4 paper and adjust
the guide.
3. Open the output tray.
4. Pull open the output tray extender.
Install cartridges
1. Open the ink access door.
2. Remove the protective tape on both
cartridges.
Caution: Do not touch the contacts
under the tape.
3. Rotate the cartridges so the taller end
faces towards the printer. Insert the
cartridges and click into place.
4. Close the ink access door.
The information contained herein is subject to change without notice.
1
3
1
3
Help and Support
For printer troubleshooting and videos, visit
the HP support site. Enter your model name
to find the printer.
2
4
2
4
hp.com/support
5