Descargar Imprimir esta página

Casals CSC1205B Instrucciones De Uso página 8

Taladro a batería de 12 v

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
EN
(Original instructions)
1205 SERIES 12V SET
CORDLESS DRILL OF 12V
CSC1205B
CSC1205BC
Dear Customer,
Many thanks for trusting to CASALS.
Thanks to its continuous effort, our innovation
and the strictest quality controls, Casals Power
Tools, S.L. develops electric Power Tools for
the toughest jobs.
WARNING Read all safety warnings
and all instructions, illustrations and
specifications provided with this power
tool. Failure to follow all instructions listed
below may result in electric shock, fire and/or
serious injury
Save all warnings and instructions for
future reference.
PRODUCT DESCRIPTION AND
SPECIFICATIONS
DESCRIPTION
A
Keyless chuck
B
Torque selector ring
C
Cooling vents
D
Charge indicator level
E
Forward/Reverse Selector
F
On/Off Switch
G
Handle with soft grip
H
LED light
I
Battery pack
J
Battery charging socket
K
Charger
L
BMC case*
(*)
Only available in the model
CSC1205BC
If the model of your appliance does not have
the accessories described above, they can
also be bought separately from the Technical
Assistance Service.
CHARGING THE BATTERY
Caution: A new battery is not fully charged
and must therefore be charged before the
appliance is used for the first time.
Charge the battery at an atmospheric
temperature of between 4 ºC and 40 ºC.
Remove the battery pack (I) from the handle by
pressing at the sides and pulling out.
Connect the charger into the battery charging
socket (the socket is located at the lower/back
part of the battery).
Plug the charger (K) into the mains.
A pilot light will come on to indicate that the
charger is ready to begin charging the battery.
The pilot light will turn red to indicate that the
charger is charging the battery.
Approximately 3 to 5 hours are needed for
a complete charge of the battery. Never
attempt to over charge the battery (although
it is recommended that the first charge of the
battery be of 5 hours in duration).
LED light from the charger will become green
when the battery is fully charged.
When the battery is charged disconnect the
charger from the mains supply.
NB: For the battery to work optimally, avoid
prolonged discharge cycles. Re-charge the
battery frequently. Avoid total discharge of the
batteries. This type of discharge damages the
battery cells. The most frequent cause of total
battery discharge is long storage. Store the

Publicidad

loading

Este manual también es adecuado para:

Csc1205bc