ENG
These instructions concern only the electrical installation and the use of the control
system with the equipment. For mechanical installation please see the operator's
instructions supplied.
During assembly, installation and test operations of the automatic device, hazardous
situations might arise if the safety warnings contained in the instructions are not
followed. Carefully read this instruction manual before proceeding. Instructions must
be available with the system for any use or maintenance operation needed.
The data indicated are to be considered for indicative purposes only. The
manufacturer is not to be held responsible for any inaccuracy contained in this
manual arising from printing or transcription mistakes.
The company reserves the right to make changes to improve the product without
giving prior notice.
The equipment ROLL500S is designed to control functioning 230-volt rolling shutters
operators.
Only use the product for the permitted uses specified. Do not use the product
for purposes other than those specified. You should note the operating
restrictions specified in the installation manual supplied with the operator. Do
not tamper with or modify the product. The product must only be installed
using APRIMATIC material.
Aprimatic srl declines all liability for damages caused by failure to follow these
instructions.
The device can be used by children aged under 8 years and persons with reduced
physical, sensory or mental capabilities, or lack of experience or the necessary
knowledge, provided under surveillance or after their having received instructions to
'ensure safe operation and to the understanding of the dangers inherent in it.
Children should be supervised to ensure that they do not play with the device,
including the remote control. Cleaning and maintenance meant to be performed
by the user does not have to be made by children without supervision.
The instructions can also be downloaded from the website www.aprimatic.it
9