Safety Instructions - Dexter 200SHS2.5 Manual De Instrucciones

FR
1. INTENDED USE OF SHEET SANDER
ES
This machine is intended to be used for dry sanding with suitable grained abrasive papers.
PT
It is suitable for surface grinding on wood, metal, body ller and ller surfaces, removal of
layers of old paint, intermediate grinding and rust removal. Do not use machines, tools and
IT
accessories for additional applications (see manufacturer's instructions) for works other
than those for which they are designed for. All other applications are expressly ruled out.
EL

2. SAFETY INSTRUCTIONS

PL
RU
GENERAL POWER TOOL SAFETY WARNINGS
KZ
WARNING! Read all safety warnings, instructions, illustrations and
speci cations provided with this power tool. Failure to follow all
UA
instructions listed below may result in electric shock, re and/or serious injury.
RO
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool
EN or battery-operated (cordless) power tool.
1. WORK AREA SAFETY
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence
of ammable liquids, gases or dust. Power tools create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2. ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never modify the plug in any
way. Do not use any adapter plugs with earthed (grounded) power tools.
Unmodi ed plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric shock if
your body is earthed or grounded.
c)
Do not expose power tools to rain or wet conditions. Water entering a power
tool will increase the risk of electric shock.
170