DURAVIT SensoWash Slim 611000001501300 Manual De Instrucciones página 26

material safely or dispose of it in an environmentally-friendly
manner. If possible, keep the packaging until the warranty period
expires.
9. Troubleshooting support
Recommendation: Initial general action in case of a malfunction
EN
> Disconnect the unit from the mains at the fuse box for at least
3 hours and then reconnect it again.
If your unit does still not work properly after following the
instructions mentioned below, contact help@duravit.com. Have
the article and serial number ready. These can be found on the
nameplate on the back of the operating instructions.
Problem
Indicator lamps and alarm function
The "Status
LED" on the
unit flashes red
once each
3 seconds.
The "Status
LED" on the
unit flashes red
twice each
3 seconds.
26
Potential cause
Malfunction.
Malfunction.
Solution
> Switch off
SensoWash .
®
> Switch on
SensoWash again.
®
If flashing does
not stop:
> Cut off power supply.
> After 30 sec.
connect it again.
> Switch off
SensoWash .
®
> Switch on
SensoWash again.
®
If flashing does
not stop: contact
help@duravit.com.
Ch.