Hitachi SPX-WKT1 Instrucciones De Instalación Y Manual De Operación página 9

Idiomas disponibles

INSTALLATION AND OPERATION MANUAL

5. SETTING THE ACTUAL DAY AND TIME

1. When the power is ON for the ﬁrst

time,

is indicated and the DAY

is ﬂickered. The DAYs except

selected DAY are indicated.

2. Press "UP" or "DOWN" buttons to

select the actual DAY, and press

"SET" .

3. Press "UP" or "DOWN" buttons to

adjust the actual Hour and Minutes,

and press "SET" .

From the second time, to change and set the actual day and time

press "DAY/CLOCK" button and set the actual DAY and time again.

6. TIMER OPERATION SETTING PROCEDURE

6.1. SETTING THE RESERVATION PATTERN

1. Press "TIMER" button.

Schedule Numbers are indicated.

Schedule Number "1" is ﬂickered

and other numbers are indicated.

2. Press "TIMER" button to select the

Schedule Number (from 1 to 5). And

press "UP" or "DOWN" buttons

to select the operation mode

(HEAT or COOL). Then press "SET".

NOTE: Before pressing "SET" button, ALL Reservation Patterns

(from 1 to 5) are cleared by pressing "RESET" for 5 seconds.

and