Angelo Po 0N0PE4 Manual De Uso página 32

ENGLISH
Hazard
Risk of electric
shock caused by
live components
Risk of electric
shock caused by
live parts
10
Where or in which situations
does the hazard occur?
• Under protective panels
• Under the control panel
• Under protection covers
• On the appliance and on
the adjacent metal parts
• On the appliance and on
the adjacent metal acces-
sories
Countermeasures
• Prevent the appliance
from being powered acci-
dentally.
• Ensure that there is no
voltage
• Before commissioning the
appliance, check that all
electric connections are
not damaged
• Use a power supply cable
with the specifi cations
indicated in section "Elec-
trical connection" of the
installation manual.
• Before appliance commis-
sioning, check that elec-
trical connections are se-
curely fi xed
• Before commissioning,
make sure that the appli-
ance and its metal acces-
sories are connected to a
system for equipotential
bonding
SAFETY
Safety device
• Protection
panels
• System
switch-dis-
connector
Equipotential
bonding sys-
tem
3320021_ut_GB