Publicidad
Idiomas disponibles
Idiomas disponibles
Eltego
| Electric Wheelchair
4.7. Lighting System
The electric wheelchair is equipped with a lighting system in
accordance with the German traffic regulations (StVZO) for safe
participation in street traffic (fig. 24). The lighting unit consists of
2 front reflectors, 2 side reflectors and 2 rear lights, which can also
serve as reflectors simultaneously.
24
The active components are controlled with a button next to the
joystick (fig. 25). Press the button briefly to switch the lighting system
on/off. Hold the button down to adjust the brightness. The lighting
system is independent of the controller and can also be operated
when the wheelchair is switched off. When exiting the wheelchair,
make sure that the light is switched off.
4.8. Rear Reflectors
25
The electric wheelchair is equipped with two rear reflectors which at
the same time also serve as reflectors (Fig. 26).
Switch the rear on as soon as it starts to get dark, or when there
are poor light conditions, so as to get a better perception of your
surroundings.
They are attached by a clip to the frame at the back and can simply
26
be pulled away to the side. By pressing the red button, you can switch
on the rear reflex reflector, choose between different flashing modes
and also switch it off again.
68
5. Acessories
5.1. Head Rest
A height and depth adjustable headrest can be mounted on your
Eltego.
5.2. Crutch Holder
Put the crutch in the crutch holder and then fix it to the backrest
Never step on the crutch holder and never use it as a tipping aid.
Bischoff & Bischoff GmbH | Rev. 04 2023.08.25
Eltego
Electric Wheelchair |
69
Publicidad
