Descargar Imprimir esta página

Broan BBN1243SS Instrucciones De Instalación, Uso Y Cuidado página 9

Publicidad

Idiomas disponibles

Idiomas disponibles

PREPARE THE CABINET (
7 . Measure the distance between both bottom bracket
edges (F) (FIG . 10) . The table below shows the appropriate
distance needed .
U
n
nit
arrow edge
BBN1243SS
From 21-7/8"
to < 22-1/16"
BBN1303SS
From 27-7/8"
to < 28-1/16"
If the measured distance needs to be shortened, screw two
no . 8-32 x 1/4" machine screws, in each bottom embossed
cabinet brackets hole; this will slightly bend the bottom part
of the brackets (FIG . 11) . Screw both brackets until the
appropriate distance is obtained .
BBn1243SS
BBn1303SS
and
8 . There are 3 different sizes of filler included with these
units, designed to fit up to 13-in . depth cabinets . For up
to 15-in . depth cabinets, another set of 4 fillers is available
(for BBN1243SS unit: HADTBN24, for BBN1303SS:
HADTBN30) . Choose the filler that fits to cover the back
bottom edge of the cabinet . Use 4 no . 6 x 3/4" truss head
wood screws (included) to mount it (FIG . 12) .
CAUTION
Never use an electric screwdriver or drill to screw the
filler to the bottom edge of cabinet; use a standard
screwdriver .
'
)
cont
d
w
ide edge
F
F
From 22-1/16"
to 22-5/16"
F
F
From 28-1/16"
to 28-5/16"
:
unitS only
F
HD1376
Screws in bottom
embossed holes
F
HD1377
HD1373
FIG. 10
FIG. 11
FIG. 12
9

Publicidad

loading

Este manual también es adecuado para:

Pm400ssBbn1303ss