Publicidad
Idiomas disponibles
Idiomas disponibles
TECHNICAL
DATA.............
Blow per minute: 4000
Piston stroke: 41 mm
Needle quantity: 19 pcs
Needle diameter: 3 mm
Air inlet: 1/4"
Working pressure: 6.2 bar (90 psi)
Air consumption: 141 l/min (5 cfm)
Air exhaust: on the side of the cylinder
Sound pressure level (LpA): 100.2 dB (A)
Sound power level (LwA): 102.2 dB (A)
Vibration level (ahd): 14.07 m/s²
Vibration level (K): 2.32 m/s²
Recommended hose: 10 mm (3/8") ID
Length: 345 mm
Net weight: 1.9 kg
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.
INTENDED USE
This air needle scaler is used to remove rust and paint from steel sheet and work pieces made of
steel.
SAFETY INFORMATIONS
When using pneumatic tools, fundamental precautionary measures must always be ensured in order
to reduce the risk of personal injury and property damage.
• Keep children and unauthorised persons away from the work area.
• Do not let any children play with the tool or its packaging.
• Make sure that the work area is sufficiently illuminated.
• Keep the work area clean, organised, dry and free from other materials.
• Do allow untrained persons work with this tool set.
• Ensure that the trigger is located in the OFF position when being connected to the compressed
air system.
• Do not carry out any modifications on the tool.
• Use only accessories that are dimensioned for use with compressed air tools.
• Disconnect the tool from the compressed air supply before installing accessories, when carrying
out maintenance work or the device is not being used.
• Maintain the tool with care. Check hoses and compressed air connections at regular intervals.
• Do not use the tool if it is damaged. Have the tool repaired by specialist personnel.
• When installing regulators, filters and other accessories, observe the manufacturer
specifications of the compressed air system.
• Store the tool in a dry and safe location out of the reach of children.
SW-Stahl und Werkzeugvertriebs GmbH
5
d i e
Air Needle Scaler
6
e
s
s
a r t S
h
c
s
m
e
R
Tel. +49 (0) 2191 / 46438-0
r e
F
ax +49 (0) 2191 / 46438-40
s
u
k r e
v
e
7
9
8
2
4 -
D
e
BGS 70971
L
d . l h
a t s
w
s
@
o f n i
: l i
Publicidad
