Protemp PT-80-OFR Manual Del Usuario E Instrucciones De Operación página 5

Tools Needed:
- Phillips Head Screw Driver
Carry Handle (1)
IMPORTANT: INSTALL HEAT SHIELD BEFORE OPERATING YOUR 80-OFR HEATER
1. Remove existing screws from shell ring on
either side of heater (see Figure 3) .
Figure 3
Figure 5
Heat Shield
© 2021 Pinnacle Climate Technologies, Inc.
NEVER LEAVE HEATER UNATTENDED WHILE BURNING
OR WHILE CONNECTED TO A POWER SOURCE
WHAT'S IN THE BOX
80-OFR
Black Screws (2)
ASSEMBLY
80-OFR
Attach the handle while still in the box for
easier unpacking (see Figures 1 and 2).
Figure 1
2. Line up holes on heat shield with holes in
shell ring. Attach with screws removed in
step 1 (see Figures 4 and 5).
Figure 4
5
Kerosene Radiant Heater User's Manual
Figure 2