Publicidad
Idiomas disponibles
Idiomas disponibles
EN
SYMBOLS
The operation manual must be read carefully.
Never dispose of electrical equipment together with household waste.
This machine conforms to CE declarations.
Use full body protective clothes.
Attention! Wear protective gloves.
Safety goggles must be worn.
Protective footwear must be worn.
Attention! Hot surface may cause burns.
Attention! Risk of fire or explosion.
Attention! Harmful fumes, danger of poisoning. Gases and vapours may be hazardous to health.
Welding gases and vapours are released during welding. Inhalation of these substances may be
hazardous to health.
Use a welding mask with appropriate filter shading.
CAUTION! Harmful radiation of welding arc.
Do not touch the parts that are under voltage/power.
PLEASE NOTE!
The original operation manual is in German. Other language versions are translations from German.
1. SAFETY OF USE
1.1 GENERAL NOTES
•
Take care of your own safety and the one of third parties by reviewing and strictly following the
instructions, included in the operating manual of the device.
•
Only qualified and skilled personnel can be allowed to start, operate, maintain and repair the machine.
•
The machine must never be operated contrary to its intended purpose.
1.2 PREPARATION OF WELDING WORK SITE
WELDING OPERATIONS MAY CAUSE FIRE OR EXPLOSION.
•
Strictly follow the occupational health and safety regulations applicable to welding operations and make
sure to provide appropriate fire extinguishers at the welding work site.
•
Never carry out welding operations in flammable places that pose the risk of material ignition.
•
Never carry out welding operations in an atmosphere containing flammable particles or vapours of
explosive substances.
•
Remove all flammable materials within 12 meters from the welding operations site and if removal is not
possible cover flammable materials with fire retardant covering.
•
Use safety measures against sparks and glowing particles of metal.
•
Make sure that sparks or hot metal splinters do not penetrate through the slots or openings in the
coverings, shields or protective screens.
•
Do not weld tanks or barrels that contain or have contained flammable substances. Do not weld in the
vicinity of such containers and barrels.
•
Do not weld pressure vessels, pipes of pressurised installations or pressure trays.
•
Always ensure adequate ventilation.
•
It is recommended to take a stable position prior to welding.
Rev. 24.07.2017
Rev. 24.07.2017
EN
Drawings in this manual are for illustration purposes only and in some details it
may differ from the actual product.
11
Publicidad
