Publicidad
the unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction.
Please contact the nearest authorized technical assistance center. Always use the same type of
spare parts.
• Make sure the power cord is never crimped or damaged.
• Never disconnect the power cord by pulling or tugging on the cord.
• Avoid direct eye exposure to the light source while it is on as sensitive persons may suffer an
epileptic shock (especially meant for epileptics)!.
• The product is for decorative purposes only and not suitable as a household room illumination.
• If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced
by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
• The lenses, housing or ultraviolet filter must be replaced if they are visibly damaged.
• The light source is not replaceable. It it is faulty, the product must be discarded.
DISCONNECT DEVICE
Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect
device shall remain readily operable.
CONTROL PANEL
The control panel is the mechanism for configuring the settings. It has a small LCD screen and four
buttons, which are described hereafter.
Button Function
<MENU>: Scrolls through the first level of options, or exits from the current menu
or function
<UP>: Navigates upward through the menu list or increases the numeric value
when in a function
<DOWN>: Navigates downward through the menu list or decreases the numeric value when in a
function
<ENTER>: Enables the currently displayed menu or sets the currently selected value in to the cur-
rent function
MENU
A001-A512
Change the address code (A001 ~ A512) with UP/DOWN and click OK to save.
CH03-CH39
Select a channel mode among CH04, CH11, CH32 and CH39 with UP/DOWN and
click OK to save.
M000-M083
84 kinds of 3in1 built-in effects (M000 ~ m083), select a built-in effect with UP/
DOWN and click OK to save
S000-S255
Set the running speed of the 3in1 built-in effects (s000 ~ s255) with UP/DOWN
and click OK to save.
M000-M040
There are 41 built-in effects for the white centre line (M000 ~ M040). Select a built-
in effect with UP/DOWN and click OK to save.
S000-S255
Change the running speed of the built-in effect (s000 ~ s255) of the white centre
line with UP/DOWN and click OK to save.
Soud
Music-controlled mode.
R255-R000
Change the red LED brightness (r000 ~ r255) with UP/DOWN and click OK to save.
G255-G000
Change the green LED brightness (G000 ~ g255) with UP/DOWN and click OK to
save.
B255-B000
Change the blue LED brightness (b000 ~ B255) with UP/DOWN and click OK to
save.
W255-B000
Change the brightness of the white centre line (w000 ~ W255) with UP/DOWN and
click OK to save.
T000
Temperature display. E.g. t045 means that the current lamp temperature is 45 °C.
If the 10K thermistor is not installed, T000 is displayed.
EN
8
© Copyright LOTRONIC 2023
Publicidad
