Enders Supreme 4999 Manual Del Usuario página 14

GB
1. Removable seat – 2. Removable lid – 3.
Freshwater tank cap – 4. Toilet cover – 5.
Pump – 6. Freshwater tank – 7. Waste
tank – 8. Sealed valve – 9. Swivelling spout
– 10. Swivelling spout cap – 11. Ventilati-
onbutton – 12. Valve – 13. Level indicator
– 14. Venting – 15. Locking lever – 16.
Transporting wheel
SET UP INSTRUCTIONS
A) Slide the locking lever to the left to dis-
connect the freshwater tank (6) from the
waste tank (7).
B) Turn the spout (9) upwards and add the
required amount of ENSAN BLUE
waste tank according to the product's inst-
ructions. Fill with two litres of fresh water.
C) Twist the cap on to the spout, then turn
the spout until it is in the folded up position.
Reconnect both sections by pressing the
top section firmly back on to the bottom
section.
D) Fill the fresh water tank with clean
water (max 15 litres). Add the required
amount of ENSAN RINSE
product's instructions.
INSTRUCTIONS FOR USE
E) Open and close the sliding valve (12)
once, withthe toilet lid (2) closed. This will
avoid too much highpressure.
F) Flush the toilet with fresh water using
the pump (5). Open the sliding valve to de-
posit the contentsof the toilet in the was-
te tank. Then close the slidingvalve once
more. The indicator level shows whenthe
waste tank needs to be emptied, green =
empty,red = full.
G) Disconnect the toilets and empty the
waste tankin the appropriate containers or
in a regular toilet.
H) Empty the waste tank using the spout.
During thisprocess hold the ventilation but-
ton in to avoid anyspillage (only hold this
button in when the spout isfacing down-
wards).
Do not use any regular toilet paper, only
ENSAN WHITE dissolving toilet paper, to
®
avoid any blockages.
FOR WINTER USE:
Only use in heated environments and pro-
tect from frost.
EMPTYING AND CLEANING
Keep the toilet clean and dry.
WARRANTY
We offer a 2 year warranty on the function
of the appliance. The warranty is contingent
upon proper use of the unit and official proof
of purchase including the date the unit was
to the bought.
®
The warranty becomes null and void
after expiration of the guarantee period or
immediately if independent modifications
are performed on the appliance.
If, despite our quality control measures,
your product should display a defect, please
contact Enders directly and do NOT return
according to the it to the retailer. This enables us to process
®
your inquiry quickly.
SERVICE AND MANUFACTURER
SERVICE:
http://www.enders-germany.com
MANUFACTURER:
Enders Colsman AG
Brauck 1, D-58791 Werdohl
Germany
Subject to colour variations and technical
modifications for the purpose of product
improvement.
14
4999