Comet CPS 36 E Manual Del Usuario página 42

6.7. SQUEEGEE BLADES DISASSEMBLY /
ASSEMBLY
Disassemble the squeegee from its support ( see 7.5).
Unscrew the knobs ( Photo 24 - A ) and remove metal
blade retainer ( Photo 24 - B )
Extract the fixing bolts ( Photo 24 - C ) and remove the
front metal blade retainer ( Photo 25 - A );
remove the squeegee rubber blades tearing them from
a side.
To replace the squeegee rubber blades, follow the same
procedure on the contrary starting from the front blade;
lock the fixing bolts ( Photo 24 - C ) retaining them in
the squared seats in the squeegee body;
then, place the rear rubber blade ( Photo 24 - D ) and
the metal blade retainer ( Photo 24 - B ), locking them
with the fixing knobs ( Photo 24 - A ).
A
B
A) Squeegee fixing knob
B) Metal retainer for rubber blades
C) Fixing bolts
D) Rear rubber blade
D
6. OPERATING INFORMATIONS
C
Photo 24
B
D
A
Photo 25
42
B
C
B