Publicidad
Idiomas disponibles
Idiomas disponibles
6.13.
SPECIFIC INSTRUCTIONS FOR THE USE OF
MODEL AC
The AC machine may be turned on only if the voltage
indicated on the tag corresponds with the available
voltage and that the electrical outlet is grounded
(earthed).
Do not damage the feed cable; do not crush or pull on it.
• ATTENTION Make sure that the power cable
does not come into contact with the rotary
brushes.
• ATTENTION - The AC machine has parts, which
are connected to the current; contact with these
could cause grave injuries or even death.
- Before executing any type of operation on the ma-
chine always disconnect it from the electrical source.
- Never touch electric cables that are defective or
worn.
- Before gaining access to the electrical system it is
always necessary to disconnect the machine from
the electrical source by removing the plug from the
socket-outlet.
- In the case of defective, damaged, or cracked elec-
tric cables, replace immediately with authentic re-
placement parts.
- The network of connections must be protected
from water spray.
- The patch cord for the connection of the ma-
chine to the mains power must conforms to cur-
rent safety rules.
- The electrical system to which the machine is con-
nected must be equipped with a cutout box.
- It is absolutely forbidden to use the machine in
proximity to swimming pools or stretches of water.
• EMERGENCY SITUATIONS
In case of emergency:
- Immediately disconnect the machine from the
power mains.
- Immediately apply proper first-aid.
If an accident should occur the machine must not be
put into operation until a technician authorized by
the manufacturer has examined it.
• Turn the key, remove it from the control panel and
disconnect the battery from the machine wiring.
☞ All work on the electrical system as well as all main-
tenance and repair operations (especially those not
explicitly described in this manual) should be carried
out only by authorized service centers or by special-
ized technical personnel who are experts in the sec-
tor and in the pertinent safety regulations.
6. OPERATING INFORMATIONS
Performing regular maintenance on the machine,
and carefully following the manufacturer's instruc-
tions, is the best guarantee for obtaining the best
performances and extended machine service life.
46
Publicidad
