JUMO hydroTRANS S20 Manual Breve página 37

4 Technical data
4.1 Electrical data
Voltage supply
Analog output
RS485 interface
Power consumption
Protection rating
Electrical connection
Connection elements
Connecting cable
Conductor cross-section
Without ferrule
With ferrule
Stripping length
Without ferrule
With ferrule
Temperature resistance
Electrical safety
Requirements
4.2 Inputs
4.2.1 Measurands
Relative humidity
Measuring range
With CO module
2
Accuracy
Typical
Max.
Sampling rate
Temperature
Measuring range
With CO module
2
Accuracy
Typical
Max.
Sampling rate
SELV, PELV
DC 24 V, -33 %/+33 %
DC 24 V, -58 %/+33 %
≤ 2.4 W
DIN EN 61140, Classe III (protective low voltage)
Spring-cage terminal
AWG 28 to AWG 14
2
0.2 to 1.5 mm
2
0.25 to 1.5 mm
8 mm
10 mm
≥ 80 °C
The device must be equipped with an electrical circuit that meets the require-
ments of DIN EN 61010-1 with regard to "Limited-energy circuits".
0 to 100 % RH
0 to 95 % RH
±2.0 % RH
±2.5 % RH
1 s
-40 to +80 °C
-10 to +60 °C
±0.2 °C
±0.4 °C
1 s
4 Technical data
9