Drexon BH-1701E Manual Del Usuario página 34

Determining the right location:
This appliance must be connected to the power supply via a
Class II - IP 24 connection box in accordance with the rules
of standard NF C 15-100.
Call in a qualified electrician.
- Important ! Make sure that there is no electrical wiring or any other
installation (e.g. water pipe) near to where the holes will be drilled.
Make sure the appliance is fixed vertically and firmly to the wall.
- Observe the minimum distances between the appliance and walls,
floors, furniture, etc.
Assembly and installation of the appliance
Warning: Pay attention to the safety distance between the floor
and the appliance.
Fix the radiator.
1. Position the mounting template in the desired location and mark
the centre of the 6 holes to be drilled.
Rev 0_04 05 23 Fabriqué en Chine Page 34