Publicidad
Idiomas disponibles
Idiomas disponibles
Automatic weekly programme mode:
This programme allows the appliance to run for a set time, at a set
temperature and a set output, every day of the week.
In "On" mode, press the
button and select PROGRAM mode.
Then press the
button to start programming.
1) The [M] symbol flashes on the display and MONDAY can be pro-
grammed. Press the + or - button, the display will show "1" and
will flash.
2) Press the + or - button, the
hour symbol will flash.
Use the + or - buttons to select the time at which COMFORT mode
should start. In the example shown above, this is 5 hours. Press
to confirm.
The minute symbol flashes on the
display. Press + or - again
to select 00 or 30 minutes (only the round hour or half-hour can be
selected). Press
to confirm. If 30 has been selected, COMFORT
mode will start at 05:30.
3) Press + to select the end of the first period. In the example shown
above, this is 10 hours. Press
to confirm. Press + or - again to
select 00 or 30 minutes (end of first period). Press
to confirm.
4) The display shows "2" and
flashes on the screen. The
second MONDAY period can now be programmed. In the example
shown above, the time is 4.30pm. Press + to select the desired time,
then confirm with
, then use + or - to select 00 or 30, then confirm.
Press + to select the end time of the second period. In the example
shown above, this is 20 hours. Confirm and select 00 or 30.
Confirm with
. The setting for MONDAY is complete.
Rev 0_04 05 23
Fabriqué en Chine
Page 43
Publicidad
