identités RS3 Manual De Instrucciones página 13

2. If the spring pins are located in the positioning holes, push the pins in and pull the handle section upwards until it is released
from the lower section. (This may require pressing the pins in twice).
3. Pull the handle section upwards until it is released from the lower section. (See photo below)
USE
Daily checkist to be checked before use
o
Clamping Levers are locked tightly
o
Castor Brakes function correctly
o
Seat is free from cuts, damage or any loose stitches.
o
Seat correctly fitted (See image below)
o
Seat hooks fit securely to arms.
o
Backrest pad secure and undamaged
o
Knee Pad(s) secure.
o
Footplate secure and clean.
1. Start with the rotating arms turned outwards and the seat hooked onto just one of the arms to allow the greatest amount
of room for the user to access the device. (See Photo below).
2. Move the RS3 device as far under the seat the user is positioned in as possible. Ask the user to place their feet onto the
footplate where the black footprints are located. (See photo below).
Version Juin 2023 13