Publicidad
Idiomas disponibles
Idiomas disponibles
Safety devices on the product
WARNING:
instructions that follow before you use the
product.
•
Do not use the product if the safety devices are
damaged or does not operate correctly.
•
Do a check of the safety devices daily. If your safety
devices are damaged or does not operate correctly,
speak to your Husqvarna service agent.
•
Do not make modifications on safety devices
ON/OFF switch
The ON/OFF switch is used to start and stop the power
supply to the product.
To do a check of the ON/OFF switch
1. Turn the emergency stop button (A) clockwise
to make sure that the emergency stop button is
disengaged.
2. Turn the ON/OFF switch to the ON position (B).
3. Make sure that the control light on the control panel
comes on.
4. Turn the ON/OFF switch to the OFF position (C).
5. Make sure that the control light on the control panel
goes off.
ON/OFF buttons of the drive motors
The ON/OFF buttons of the drive motors are used to
start and stop the drive motors. Refer to
of the drive motors on page 10 .
To do a check of the drive motors
1. Turn the emergency stop button clockwise to make
sure that the emergency stop button is disengaged.
2. Set the ON/OFF switch to the ON position.
10
Read the warning
B
A
C
To do a check
3. Push the ON button of the drive motors (A).
A
B
4. Make sure that the indicator comes on.
5. Set the speed control to 1.
6. Push the 2 joysticks forward. Make sure that the
product operates forward.
7. Set the 2 joysticks to the neutral position. Make sure
that the product stops.
8. Pull the 2 joysticks rearward. Make sure that the
product operates rearward.
9. Set the 2 joysticks to the neutral position.
10. Push the OFF button of the drive motors (B).
11. Make sure that the indicator goes out.
ON/OFF buttons of the fan unit
The ON/OFF buttons of the fan unit are used to start
and stop the fan unit. Refer to
ON/OFF buttons of the fan unit on page 10 .
To do a check of the ON/OFF buttons of the fan unit
1. Turn the emergency stop button clockwise to make
sure that the emergency stop button is disengaged.
2. Set the ON/OFF switch to the ON position.
To do a check of the
2107 - 001 - 27.07.2023
Publicidad
