Mamber's Mark Tatum SM3FTOT Instrucciones De Ensamble página 12

Step 5
a) Insert two Barrel Nuts (H9) into each end of the Lower Mattress Side Rails (S). Be sure that the cross slot on
the Barrel Nut faces out and the threaded hole points towards the entry of the bolt along the rail.
b) Bolt two Lower Mattress Side Rails (S) between the assembled headboard and footboard by using the 100 mm
Bolts (H1) through the drilled holes on the posts and screw into the Barrel Nuts (H9) in the Lower Mattress
Side Rails (S). Make sure that the wood stoppers attached to the Mattress Side Rail for slats are up and face
inward.
Assembly Instructions & User's Manual
H1 x 8
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
The wood stoppers are up
Make sure that the cross slot faces
out and the threaded hole points
towards the entry of the bolt
along the rail
12
H9 x 8