Mamber's Mark Tatum SM3FTOT Instrucciones De Ensamble página 25

Step 18
H8 x 4
a) Now, place the lower bunk in the desired location in the room where the bunk bed will sit.
b) Insert four Bed Connector Pins (H8) into the Lower Posts (Q and R).
c) Ask for assistance to stack the Upper Posts (A, B and C) onto the Bed Connector Pins (H8) on the Lower
Posts (Q and R).
NOTE: Make sure that the upper bunk sits completely on the top of the lower bunk and the connector pins,
not leaving any gaps.
Assembly Instructions & User's Manual
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
25