Mamber's Mark Tatum SM3FTOT Instrucciones De Ensamble página 22

Assembly Instructions & User's Manual
Step 15
H6 x 14
The countersunk holes face upward
a) Lay out the other Mattress Support Slats (M) onto the strips on the Upper Ladder Side Rail (G) and the Upper
Mattress Side Rail (H). Insert and screw 35 mm Screws (H6) into the countersunk holes on each slat. Tighten
the screws using a Phillips screwdriver.
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
22