Mamber's Mark Tatum SM3FTOT Instrucciones De Ensamble página 8

Step 1
NOTE: Please follow the instructions carefully to insure a safe and sturdy bed. Do not fully tighten
the bolts until all rails and guardrails are attached.
a) Unpack the units and confirm that you have all hardware and required parts.
b) Locate one Bottom Crossbar (U) on a level and protected surface with the groove facing inward.
c) Insert one 50 mm Wood Dowel (H5) into the end large hole of one Bottom Crossbar (U) and attach it to the
Lower Headboard Front Post (Q) using one 100 mm Tapping Bolt (H3). Securely tighten the bolt with the
provided hex wrench.
d) Repeat the same procedure to combine the Lower Footboard Back Post (Q) with another Bottom Crossbar
(U) together.
Assembly Instructions & User's Manual
H3 x 2
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
H5 x 2
8