Mamber's Mark Tatum SM3FTOT Instrucciones De Ensamble página 13

Assembly Instructions & User's Manual
Step 6
H6 x 14
The countersunk holes face upward
a) Lay out one Mattress Support Slats (M) onto the strips on the Lower Mattress Side Rails (S). Make sure that
the end slats are located close to the Lower Posts. Insert and screw the 35 mm Screws (H6) into the
countersunk holes on each slat. Tighten the screws using a Phillips screwdriver.
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
13