Mamber's Mark Tatum SM3FTOT Instrucciones De Ensamble página 28

Disassembling the Bunk Bed
H11 x 4
a) To convert the bunk bed back into two identical twin beds, first unscrew the bolts to remove the Ladder and
all Guardrails.
b) Have an assistant help to remove the Upper Bunk from the Lower Bunk.
c) Disassemble the side rails from all headboards (Upper and Lower Bunks).
d) Re-assemble the headboards (with tall posts) and footboards (with short posts) to Side Rails as shown. Attach
the Floor Protectors (H11) onto the bottom of the footboard posts, as shown in the illustration.
NOTE: Switching the headboards will allow the two single beds to be identical (the headboards will have
taller posts and the footboards will have the shorter posts).
Assembly Instructions & User's Manual
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
28