Mamber's Mark Tatum SM3FTOT Instrucciones De Ensamble página 21

Step 14
a) Insert the 50 mm Wood Dowels (H5) into the drilled large holes of Long Guardrail (J) at both ends. Attach 2
Long Guardrails (J) between the Upper Posts (A and B) with 100 mm Tapping Bolts (H3).
b) Attach the Upper Mattress Side Rail (H) between the Upper Posts (A and B) with four 100 mm Bolts (H1) and
four Barrel Nuts (H9). Make sure the wood stoppers for slats attached on side rail are up and face inward.
c) Orient and attach the Upper Ladder Side Rail (G) between the Upper Posts (A and C) using four 100 mm Bolts
(H1) and 4 Barrel Nuts (H9). Make sure the wood stoppers for slat attached on side rail are up and face inward.
Assembly Instructions & User's Manual
H1 x 8
H3 x 4
The pilot holes face outward
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
The wood stoppers are up
Make sure that the cross slot faces out
and the threaded hole points towards
the entry of the bolt along the rail
The pilot holes face outward
and is located at left
21
H5 x 4
H9 x 8