Mamber's Mark Tatum SM3FTOT Instrucciones De Ensamble página 4

Assembly Instructions & User's Manual
General Information
 ALWAYS USE GUARDRAILS ON BOTH LONG SIDES OF THE UPPER BUNK. IF THE BUNK BED WILL BE
PLACED NEXT TO THE WALL, THE GUARDRAIL THAT RUNS THE FULL LENGTH OF THE BED SHOULD BE
PLACED AGAINST THE WALL TO PREVENT ENTRAPMENT BETWEEN THE BED AND WALL.
 STRANGULATION HAZARD - Never attach or hang items to any part of the bunk bed that are not
designed for use with the bed; for example, but not limited to, hooks, belts, and jump ropes.
 Maximum mattress thickness must not exceed 20.32 cm (8 in.). Surface of mattress must be at least
12.7 cm (5 in.) below the upper edge of guardrails.
 Use only mattress which is 1.88 m (74 in.) to 1.90 m (75 in.) long and 95.25 cm (37 ½ in.) to 97.79 cm
(38 ½ in.) wide on the bed.
 Replacement parts, including additional guardrails, may be obtained from any of our dealers.
Tips and Tricks
1. Keep all hardware and parts out of the reach of children.
2. Use the long end of the hex wrench to fasten bolts loosely and quickly.
3. Use the short end of the hex wrench for final tightening.
①
4
②