Publicidad
Idiomas disponibles
Idiomas disponibles
Tools needed for installation
• Teflon tape or pipe
joint compound
(gas only)
• Cutting
knife
• Pipe wrench
(gas only)
• Nut drivers
• Level
• Screw driver
(standard)
• Duct tape
• Crescent
wrench
ITEMS PROVIDED
@@
@@
Electric
Dryer
Only
@@
@
Gas
Dryer
Only
Proper installation
is the responsibility
of the owner.
HOWEVER,
SERVICE
CALLS
PERFORMED
AS A RESULT
OF POOR SET-UP, ADJUSTMENT
AND
CONNECTION
ARE THE RESPONSIBILITY
OF THE INSTALLER.
Make sure you have everything
necessary
for proper installation.
1. GROUNDED
ELECTRICAL
OUTLET
is required.
See Electric
Requirements.
2. POWER
CORD for electric
dryers (except
Canada).
3. GAS LINES (if a gas dryer) must meet National
and Local Codes.
4. EXHAUST SYSTEM - must be rigid metal or flexible stiff walled metal exhaust ducting. See Exhaust Requirements.
CABINET DIMENSIONS
7200 series
INCH (CM)
A. Height-overall
B.
Width
C.
Depth-With
Dryer Door O_n
90 °
D. Depth
E.
Bottom
Vent Hole Location
- From Back
'1_ Center of Hole
Side Vent Hole - From Back 'lk_ Center
Of
Hole
38" (96.5)
27" (68.6)
46-7/16" (123.0)
28" (71.0)
7-1/2"
(19)
8-1/2" (21.6)
Note:
The height of the dryer from top to floor is 38" with the leveling leg screwed all the way in. The customer can
unscrew the leg out an additional 7_8"for a total overall height of 38 7/8".
Publicidad
