Publicidad
Idiomas disponibles
Idiomas disponibles
Recommendations for compressors intended for wells:
CSD 5 / AD
• Open the top cover of the Control Box by removing the screws. (Figure 6.12)
• Insert the fl oat switch installation cables through the cable gland at the bottom of the Control Box.
(Figure 6.13)
• Remove the jumper. (Figure 6.14)
• Screw the fl oat switch installation cables where indicated. Next, close the top cover. (Figure 6.15)
• For wiring see the wiring diagram at the end of the manual.
FIGURE 6.12
FIGURE 6.13
FIGURE 6.14
FIGURE 6.15
ATTENTION
Installation only with an electric fl oat.
Well depth of up to 60 meters of water column.
54
Publicidad
