Publicidad
Idiomas disponibles
Idiomas disponibles
•
Keep all safety equipment, guards, covers and devices in position and in good condition. Keep hands,
hair, clothing, and tools away from belts, gears, fans, and any moving parts during equipment startup,
operation, or maintenance.
•
Do not put your hands near the fan motor. Do not try to overuse the governor or tensioner by pressing
the throttle while the engine is running.
NEVER add fuel near an open ame or welding arc or when the engine is running. Stop the engine and
allow it to cool before refueling to prevent res. Do not spill fuel when lling the tank. If there are spills,
clean it up and do not start the engine until the vapors have been eliminated.
•
Remove re hazards from the welding area. If this is not possible, cover them to prevent the welding
sparks from starting a re. Remember that welding sparks can easily go through small openings to
adjacent areas. Avoid welding near hydraulic lines. Keep a re extinguisher available.
•
To avoid hazardous situations in places where compressed gases are used additional precautions
should be taken.
•
While there is no welding operation being done, make sure no part of the circuit is in contact with the
working piece or the ground. Accidental contact can cause overheating or re hazard.
•
Do not heat, cut or weld tanks, drums or containers until measures have been taken to ensure that
ammable gases and toxic vapors had been eliminated, they can cause explosions.
•
Vent hollow castings or containers before heating, cutting or welding them. They may explode.
•
Sparks and spatter are thrown from the welding arc. Wear oil free protective clothing such as leather
gloves, heavy shirts and pants, protected shoes and head protection. Wear ear plugs when welding in
con ned places.
•
Connect the work cable as close as possible to the welding work area. Work cables connected to the
building structure can increase the possibility of the welding current passing through cables and
alternate circuits.
SELF PROTECTION
WELDING SPARKS CAN CAUSE FIRE OR EXPLOSION.
03
SWEISSWELD.COM
Publicidad
