Oster XPERT Serie Manual De Instrucciones página 26

NOTE: The control panel language settings can be set to either English, Spanish or Portuguese. To
select a language, press the power button (
for five (5) seconds. Select the desired language with the up or down arrow keys and then press
the start/pause button
NOTE: To select a language, the blender should be on the main screen.
ASSEMBLING THE 2 L JAR USING THE OSTER
BLENDER WITH ACTIVESENSE™ TECHNOLOGY
Before you use the product for the first time, separate all parts and clean them. Refer to
page 16 for cleaning instructions.
WARNING: Blade is sharp. Handle with care.
BLADE & JAR ASSEMBLY
1. Place the blade into the threaded cup bottom.
2. Place the sealing ring over the blade assembly. Carefully press and tuck the sealing
ring into the last groove of the threaded cup bottom.
3. Ensure the sealing ring is fully and evenly tucked in place and holding the blade
assembly to the threaded cup bottom.
4. Install the integrated blade assembly onto
the jar. Turn clockwise to tighten. Be sure
the integrated blade assembly is tightened
to the jar before use.
5. Choose a recipe from the recipe book
provided.
6. Put the ingredients into the jar.
7. Secure the lid and filler cap.
8. Place the jar onto the motor base.
9. Plug the power cord into a standard
household outlet of the same voltage as
the one indicated in the rating plate of your
blender. You are now ready to start.
FOOD MODE
1. Press the power button
blink, indicating the product is active and ready to use. The light will stay on when the
motor is running.
BLSTTDT Series_BLSTTDG Series_18SEPM1.indd 7
) to turn the unit on. Hold the texture button
( )
to save your selection.
to turn the product on. The start/pause button (
( )
E n gl i sh -7
Note: The filler cap can be used as a tool to
tighten or remove the threaded cup bottom.
( )
®
Filler Cap
Threaded
Cup Bottom
) will
1/17/19 08:52