American Standard Colony Pro TU075 Serie Manual Del Propietário página 3

INSTALLATION INSTRUCTIONS
1
ROUGHING-IN DIMENSIONS
• To assure proper positioning in relation to
wall. Note roughing-in dimensions.
2
CARTRIDGE INSTALLATION
• Remove PLASTER GUARD (6) (Keep it
installed for thin wall Installation).
• Remove BONNET NUT (1) by unthreading it
Counter clockwise. Remove TEST CAP (2).
• Remove PROTECTIVE HOUSING (3) from
CARTRIDGE (4). Install with "UP" text on
top.
• Reinstall BONNET NUT (1) onto VALVE
BODY (5) and tighten firmly with 12 Nm
or 9 lbs/ft.
NOTE: Specified tightening torque of
BONNET NUT (1) is critical to assure
sealing function.
FINISHED WALL
8-9/16"
(217 mm)
4-1/16"
6-1/8"
(99 mm)
(155 mm)
3-3/4"
(96 mm)
7-1/2"
(190 mm)
74" (1879 mm)
FOR HEAD
CLEARANCE
4-3/16"
(106 mm)
18" (457 mm)
OPTIONAL
5-3/8"
(136 mm)
1-1/2"
(38 mm)
2-7/16"
(63 mm)
4-7/8"
(124 mm)
TOP OF TUB RIM
BOTTOM OF TUB
5
1
2
2" TO 3"
(51 TO 76 mm)
1/2" NPT
OPTIONAL TO FINISHED
FLOOR USUALLY
BETWEEN 65'' AND 78"
(1651 AND 1981 mm)
7-1/2" DIA.
(190 mm)
2-3/4" MAX. (69 mm)
1-3/4" MIN. (45 mm)
1/2" COPPER
4" (102 mm)
FOR SLIP-ON
SPOUT
3
4
6