American Standard Colony Pro TU075 Serie Manual Del Propietário página 4

3
STANDARD WALL INSTALLATION
• Figure 1. Remove plaster guard from valve. Push CAP (1)
over VALVE CARTRIDGE (2) until seated against stop.
• Figure 2. Push ESCUTCHEON (3) onto CAP (1) and
attach to valve body with LONG SCREWS (4).
THIN WALL INSTALLATION
• Figure 1a. Push CAP (1) over VALVE CARTRIDGE (2)
until seated against stop.
• Figure 2a. Push ESCUTCHEON (3) onto CAP (1)
and attach to valve body with LONG SCREWS (4).
PLASTER
GUARD
Figure 1.
Figure 1a.
4
INSTALL TUB SPOUT, SHOWER HEAD, SHOWER ARM WITH FLANGE
Turn off hot and cold water
supplies before beginning.
• Remove pipe cap and plug from shower and tub rough piping.
• Slip TUB SPOUT (1) onto tub nipple and tighten with 2.5 mm
Hex Wrench.
CAUTION: Protect finish on TUB SPOUT when installing.
• Install SHOWER ESCUTCHEON (2) onto SHOWER ARM (3).
Apply sealant or Teflon tape to threads on both ends of
SHOWER ARM (3) and thread longer leg of SHOWER ARM (3)
into shower elbow.
• Thread SHOWER HEAD (4) onto SHOWER ARM (3).
CAUTION: Protect finish on SHOWER HEAD and ARM
when installing.
• Slip ADAPTER (5) onto CARTRIDGE (6) and thread
SCREW (7) on.
1
2
2
1
4
1
Figure 2.
1
Figure 2a.
SHR.
ELBOW
PIPE
PLUG
TUB FILLER
NIPPLE
1 -
1 / 2
" R
E F
.
2.5 MM HEX
WRENCH
3
4
3
4
2
3
4
6
5
7
1