Urmet 2 Voice 1760/15 Manual De Uso página 32

1.6 ACTIVATION OF AN AUXILIARY FUNCTION
It is possible to activate an auxiliary function in the following 2 ways :
1. Idle (display off)
• Pass with your hand once in front of the video door phone IR detector.
• Then say one of the following voice commands:
– "Activate 1, Activate 2, etc"
– "Activation 1, Activation 2, etc"
There are a maximum of 10 commands.
The video door phone displays the following pop-up to confirm the reception of the voice command.
2. In voice mode
• Pass with your hand once in front of the video door phone IR detector during the conversation.
• Then say one of the following voice commands:
– "Activate 1, Activate 2, etc"
– "Activation 1, Activation 2, etc"
There are a maximum of 10 commands.
The video door phone displays the following pop-up to confirm the reception of the voice command.
32
DS1760-067A