B
DV8000J-03170M-01_EN-US_150122.indd 33
10. Remove the holder-glass.
11. Exchange the positions of:
A. The cover-hinge and handle door
B. The holder-hinge and guiderholder
glass
12. Remove the door-lever, and then install
it on the opposite side.
NOTE
Refer to the illustrations on the left to aid
you in the assembly process.
13. Remove the cover-hole (C).
14. Assemble the holder glass and then
fasten the 14 screws that you removed
in step 9.
15. Attach the cover-hole.
NOTE
C
A spare cover hole is in the assy manual.
English 33
2015/1/23 16:30:02