Samsung DV52J8060E Manual Del Usuario página 38

Operations
03 Temp.
04 Time
05 Digital graphic
display
06 Anti Static
07 Rack Dry
08 Mixed Load
Bell
38 English
DV8000J-03170M-01_EN-US_150122.indd 38
Press to change the temperature for the current cycle.
• High: For sturdy cottons or those labeled Tumble Dry.
• Medium: For permanent press, synthetics, lightweight cottons, or
items labeled Tumble Dry Medium.
• Med Low: For heat lower than Medium. Use to dry synthetic or
washable knit fabrics.
• Low: For heat sensitive items labeled Tumble Dry Low or Tumble
Dry Warm.
• Extra Low: Provides the lowest heated drying temperature
possible.
Press to adjust the drying time, when using Manual Dry cycles.
This button is not available for Sensor Dry cycles because exact
drying times are determined by fluctuating humidity levels.
Displays all cycle information, including cycle time, information code,
and dryer status.
Steam
Child Lock
Filter Check
Vent Sensor
Reduces static caused by clothing friction by spraying steam late in a
drying cycle.
The Anti Static function is only available with the NORMAL, HEAVY
DUTY, PERM PRESS, DELICATES and TIME DRY.
Rack Dry is available in the TIME DRY. Temperature will be
set to Extra Low only. (Refer to the "Rack Dry" section on page 35.)
The mixed load bell that notifies you when the average
dry level in a load is damp dry (80% dried). This lets you take
garments that you don't want fully dried or that dry quickly out of the
dryer early while letting others continue to dry.
You can select this function in all Sensor Dry cycles except WOOL and
ACTIVE WEAR. The dry level selections are limited to Normal Dry,
More Dry, and Very Dry.
Drying in progress
Cooling in progress
Wrinkle Prevent in
progress
Cycle is complete
2015/1/23 16:30:04