HSM 450.2 Instrucciones De Servicio página 18

HSM 450.2
Switching paper shredder on
Pull out emergency-stop
I
I
Turn main switch to position
0
Notice
Safety switches are installed at the doors.
Paper shredder is only to switch on if there are all doors closed.
Press the green arrow button
• cutting system runs in feed direction
Caution!
If the paper shredder runs in reverse direction when forward arrow is pressed, immediately
switch off the main switch and pull mains plug.
Two of the three phases in the plug marked with L
electrician. Observe circuit diagram!
Insert paper into the paper feed apertures
Paper feed slot
• : smooth paper +
stacks of continuous lists
The tray can be folded out to hold stacks of paper or
continuous lists.
The shredder blades are controlled by the light
barrier in the paper feed slot.
Filling drum
• : crumpled paper
Pull the drum handle forward and put the crumpled
paper in the drum.
When you push back the handle the paper falls into
the shredder blades.
Switching paper shredder to standby mode
Press stop pushbutton
• cutting system stops
• paper shredder continues to be ready
for operation (standby function)
Switching paper shredder off
I
Turn main switch to position
0
0
(secure main switch with a padlock, if
necessary)
18
Paper shredder
I
0
GB
, L und L must be interchanged by an
1 2 3
crumpled paper
smooth
paper + stacks
of continuous
lists
05/02