us_main.book.book Page 77 Thursday, January 27, 2022 1:33 PM
Problem
Uneven flame
Improper burner cap installation
a
b
• Check installation of burner head and cap.
Burner ports clogged by food residue
c
d
• Hardened residue should be removed using a toothbrush.
Burner cap color
Scratching
change and lost
• Do not use steel wool or abrasive cleansers to clean.
shine
Use of detergent or abrasive cleansers
• To remove burnt-on food, soak the burner heads in hot water for 20–30 minutes.
(Do not use detergent)
a
Knobs melt
Improper usage
• Do not leave door at stop position during Broil/Bake mode or right after cooking.
Possible Cause & Prevention
Burner cap is properly seated.
Burner cap is NOT properly seated.
Ports blocked by dirt
Flames uneven
Shine is lost.
LIMITED WARRANTY
77