General Safety Rules - Bosch GLL2-45 Instrucciones De Funcionamiento Y Seguridad

Read all instructions. Failure to follow all instructions listed below
!
WARNING
may result in hazardous radiation exposure, electric shock, fire and/or
serious injury. The term "tool" in all of the warnings listed below refers to your mains-operated
(corded) tool or battery-operated (cordless) tool.
The following labels are on your laser tool for your convenience and
!
WARNING
safety. They indicate where the laser light is emitted by the tool.
ALWAYS BE AWARE of their location when using the tool.
2
IEC 60825-1:2007-03
<1 mW, 635 nm
Laser Radiation. Do not stare into the beam.
Class 2 Laser product.
Radiación láser. No mire al rayo. Producto láser de Clase 2.
Rayonnement laser. Ne regardez pas directement dans le
faisceau. Produit laser de Classe 2.
Do not direct the laser beam at persons or animals and do not stare into
the laser beam yourself. This tool produces laser class 2 laser radiation and
complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant
to Laser Notice No. 50, dated June 24, 2007. This can lead to persons being
blinded.
DO NOT remove or deface any warning or caution labels. Removing labels increases the
risk of exposure to laser radiation.
2
IEC 60825-1:2007-03
Use of controls or adjustments or performance of procedures other than those specified in this
<1 mW, 635 nm
Laser Radiation. Do not stare into the beam.
manual, may result in hazardous radiation exposure.
Class 2 Laser product.
Radiación láser. No mire al rayo. Producto láser de Clase 2.
ALWAYS make sure that any bystanders in the vicinity of use are made aware of the dangers of
Rayonnement laser. Ne regardez pas directement dans le
faisceau. Produit laser de Classe 2.
looking directly into the laser tool.
DO NOT place the laser tool in a position that may cause anyone to stare into the laser
beam intentionally or unintentionally. Serious eye injury could result.
ALWAYS position the laser tool securely. Damage to the laser tool and/or serious injury to the
user could result if the laser tool fails.
ALWAYS use only the accessories that are recommended by the manufacturer of your
laser tool. Use of accessories that have been designed for use with other laser tools could result
in serious injury.
DO NOT use this laser tool for any purpose other than those outlined in this manual. This
could result in serious injury.
DO NOT leave the laser tool "ON" unattended in any operating mode.
DO NOT disassemble the laser tool. There are no user serviceable parts inside. Do not
modify the product in any way. Modifying the laser tool may result in hazardous laser
radiation exposure.
DO NOT use the laser viewing glasses as safety goggles. The laser viewing glasses are
used for improved visualization of the laser beam, but they do not protect against laser radiation.
DO NOT use the laser viewing glasses as sun glasses or in traffic. The laser viewing
glasses do not afford complete UV protection and reduce color perception.
DO NOT use any optical tools such as, but not limited to, telescopes or transits to view
the laser beam. Serious eye injury could result.
DO NOT stare directly at the laser beam or project the laser beam directly into the eyes
of others. Serious eye injury could result.

General Safety Rules

SAVE THESE INSTRUCTIONS
-6-