Publicidad
1. For DYM100901 and DYM101301, make sure the On-off button is pulled out. (Fig. 6A)
2. Open the battery door. (Fig.6B/Fig.6C)
3. For DYM 101902, make sure the isolator key is switched off. Switch mark "1" is ON", "0" is "OFF". (Fig. 6D)
4. Insert the battery pack into battery holder. (Fig. 6E/Fig.6F)
5. Make sure the latch on bottom of battery pack snaps in place and that battery pack is fully seated.
6. Close the battery door. (Fig.6G/Fig.6H)
On-off button
Fig.6A
Fig. 6B (DYM100901& DYM101301) Fig.6C(DYM101902)
0
1
Fig. 6D
Fig. 6E(DYM100901& DYM101301) Fig. 6F(DYM101902)
Fig.6G (DYM100901& DYM101301)
5.6 REMOVE THE BATTERY
1. Lift and hold up the battery door.
2. Press and hold the battery latch button (1) at the bottom of the battery pack. (Fig.7A/Fig.7B)
3. Remove battery pack from the product. (Fig.7C/Fig.7D)
1
Fig.7A (DYM100901& DYM101301) Fig.7B (DYM101902)
Fig.6H (DYM101902)
1
133
Fig.7C (DYM100901& DYM101301)
Publicidad
