EGO WDV0900 Manual De Instrucciones página 20

CONNECTING/DISCONNECTING THE VACUUM HOSE (Fig. 2)
To Connect the Vacuum Hose
(Fig. 2a)
1. Align the end (with two hose-release
buttons) of the hose with the suction
inlet port or the blowing outlet port
according to your needs.
2. Push the end into the suction inlet
port or the blowing outlet port until
you hear a "click" sound which
indicates the hose is secured in
place.
To Disconnect the Vacuum Hose
(Fig. 2b)
Press and hold both hose-release buttons
on the end of the hose to remove the
vacuum hose from the vacuum cleaner.
CONNECTING/DISCONNECTING
THE EXTENSION TUBES (Fig. 3)
Connect one or two extension tubes to the
vacuum hose according to your needs.
To Connect the Extension Tube
1. Align the narrow end of the
extension tube with the vacuum
hose.
2. Insert the extension tube into the vacuum hose as far as you can until the
extension tube is secured in place.
20
56V LITHIUM-ION WET/DRY VACUUM CLEANER — WDV0900/WDV0900-FC
2a
Suction Inlet
Port
Vacuum
Hose
2b
3
Vacuum Narrow End
Hose
Blowing Outlet
Port
Extension Tubes
Wide End