Publicidad
Idiomas disponibles
Idiomas disponibles
Power-Tool Adapter (Fig. 4c)
The power-tool adapter allows the
vacuum cleaner to connect to a power tool
with Ø1-1/4" dust outlet.
With the vacuum hose connected to the
suction inlet port of the vacuum cleaner,
insert the power-tool adapter into the
vacuum cleaner as far as you can until
the power-tool adapter is secured in place
and then connect the adapter to the dust outlet of the power tool.
WARNING:
tube(s). Forcing the installation may cause damage for the power-tool adapter or the
extension tube(s).
INSTALLING/REMOVING THE POWER HEAD ASSEMBLY (Fig. 5)
To Install the Power Head
Assembly (Fig. 5a & 5b)
1. Push the lower parts of the dust tank
latches on both sides to unlock the
dust tank (Fig. 5a).
2. Hold the handle of the power head
assembly and align the power head
assembly with the dust tank. Lower
the power head assembly onto the
dust tank (Fig. 5a).
3. Push the upper parts of the dust
tank latches on both sides to lock
the dust tank (Fig. 5b).
22
56V LITHIUM-ION WET/DRY VACUUM CLEANER — WDV0900/WDV0900-FC
The power-tool adapter cannot be connected to the extension
4c
Power-Tool
Adapter
Power Tool
(not provided)
5a
5b
3
Suction Inlet
Port
Vacuum Hose
2
Publicidad
