Publicidad
Idiomas disponibles
Idiomas disponibles
FILTER MAINTENANCE (Fig. 11)
Filter Self-Cleaning System
The vacuum cleaner is equipped with a
semi-automatic filter self-cleaning system
to clean the filter.
1. Connect the vacuum hose to the
suction inlet port of the vacuum
cleaner and install the other end of
the hose onto the filter self-cleaning
plug (Fig. 11a).
2. Install the battery pack, press the
power button to power on the
machine.
3. Select desired speed mode and
press the start/stop button to turn
on the machine.
4. Press the filter self-cleaning button
to clean the filter (Fig. 11b).
TIPS: To achieve the best cleaning effect, it is recommended to select TURBO mode
and press the filter self-cleaning button five times and hold for 3 seconds each time.
Washing the Filter
Remove the battery pack and examine the filter by lifting the power head assembly.
If the filter is still dirty after following the steps in the section "Filter Self-cleaning
System", remove the filter and rinse it in cold water. Allow the filter to dry completely
and reinstall it.
32
56V LITHIUM-ION WET/DRY VACUUM CLEANER — WDV0900/WDV0900-FC
11a
Suction Inlet
Port
11b
Vacuum
Hose
Filter Self-cleaning Plug
Filter Self-
Cleaning
Button
Publicidad
