EGO WDV0900 Manual De Instrucciones página 23

To Remove the Power Head
Assembly (Fig. 5c)
1. Push the lower parts of the dust
tank latches on both sides to unlock
the dust tank.
2. Hold the handle to lift the power
head assembly.
INSTALLING/REMOVING THE
DUST BAG (OPTIONAL) (Fig. 6)
1. Unlock the dust tank and lift the
power head assembly.
2. To install the dust bag, align
the plate of the dust bag with the
slot of the dust bag bracket, and
then insert only the plate into the
slot until the plate falls down the
ribs, which indicates the holes
of the dust bag and the bracket
are aligned. Unfold the dust bag
manually before collecting dust or
debris.
To remove the dust bag, slightly
lift the plate over the ribs and
then pull the plate from the slot to
remove the dust bag.
56V LITHIUM-ION WET/DRY VACUUM CLEANER — WDV0900/WDV0900-FC
5c
6a
Dust Bag Bracket
6b
2
Slot
Dust Bag
Plate
Ribs
23