Publicidad
Idiomas disponibles
Idiomas disponibles
To Disconnect the Extension tube
Pull the extension tube from the vacuum hose.
The second extension tube is connected/disconnected to the first tube in the same
fashion.
INSTALLING/REMOVING THE NOZZLES (Fig. 4)
Choose a suitable nozzle to install onto the vacuum hose directly or onto the extension
tube according to your needs (Fig. 4a).
Follow the process in the section "CONNECTING/DISCONNECTING THE EXTENSION
TUBES" to connect or disconnect the nozzle to/from the extension tube.
To connect the nozzle to the vacuum hose directly, align the knob on the nozzle with
the groove in the vacuum hose, and then push the nozzle onto the vacuum hose until
you hear a "click" sound which indicates the nozzle is installed in place. To disconnect,
press and hold the release button to remove the nozzle from the vacuum hose.
4a
Knob
Groove
Extension Tubes (Optional)
Release Button
Nozzle
Crevice Nozzle (Fig. 4b)
4b
The dark areas could be easily cleaned
when using the crevice nozzle combined
with the integrated light of the remote
control.
Crevice Nozzle
Connect the crevice nozzle to the vacuum
Light Button
hose and snap the remote control onto
the remote-control mount on the vacuum
Remote Control
hose. Press the light button on the remote
control and the transparent crevice nozzle will light up.
21
56V LITHIUM-ION WET/DRY VACUUM CLEANER — WDV0900/WDV0900-FC
Publicidad
